1. 有效减少热损失
　　1. Effectively reduce heat loss
　　传统加热方法是通过加热的传热,加热方法有一个缺点,会有明显的热损失,和电锅炉、飞凌电锅炉是一种电磁感应加热技术用于加热操作,所以在使用的时候是直接通过缸加热后传入的材料上面,这种加热方式的优点是加热缸的更均匀,而气缸外有保温棉的保护，能让热损失降更低。
　　The traditional heating method is through the heat transfer of heating. The heating method has one disadvantage, which will cause obvious heat loss. The electric boiler and Feiling electric boiler are electromagnetic induction heating technologies used for heating operation, so when they are used, they are directly transmitted to the upper surface of the material after being heated by the cylinder. The advantage of this heating method is that the heating cylinder is more uniform, and the cylinder is protected by heat preservation cotton, which can make the heat Losses have been reduced to a lower level.
　　2. 改善工作环境
　　2. Improve the working environment
　　传统的加热方式是通过热传导加热,从而使环境温度较高,和电磁感应电锅炉使用感应加热的方法,直接让缸加热材料,外部散热很小,所以传统加热的环境可能非常高,和电磁感应加热温度是接近的。
　　The traditional heating method is to heat by heat conduction, so that the ambient temperature is higher. The induction heating method is used with the electromagnetic induction boiler to directly heat the cylinder materials, and the external heat dissipation is very small, so the traditional heating environment may be very high, which is close to the electromagnetic induction heating temperature.
　　3.增加生产能力
　　3. Increase production capacity
　　电磁感应加热的方法是通过分子的运动直接产生热量，使预热时间缩短了三分之一到三分之二，热效率高达98%以上。在加热过程中，可以说减少了30%以上的能源，大大降低了生产效率和生产成本。
　　The method of electromagnetic induction heating is to generate heat directly through the movement of molecules, which shortens the preheating time by one-third to two-thirds, and the thermal efficiency is over 98%. In the heating process, it can be said to reduce more than 30% of the energy, greatly reducing the production efficiency and production costs.
　　以供暖项目为例
　　Take heating project as an example
　　1. 热效率高，加热速度快
　　1. High thermal efficiency and fast heating speed

　　在相同的功率条件下，加热速度越快，能耗越少，而电锅炉加热速度非常快，几十秒就能提供热水，可以让温度迅速升高。
　　Under the same power condition, the faster the heating speed is, the less the energy consumption is. However, the electric boiler heating speed is very fast, which can provide hot water in tens of seconds and make the temperature rise rapidly.
　　2. 加热方式为恒温加热
　　2. The heating mode is constant temperature heating
　　通过恒温加热,可以避免很多因为设备的开启和关闭造成的热损失,传统的加热方式加热到指定温度,然后停止加热,需要打开或已经在全功率加热,这导致了加热时间非常苛刻,并使用一个常数变频电锅炉加热,加热到一定温度后绝缘可以转化为低功耗操作。
　　Through constant temperature heating, many heat losses caused by the opening and closing of the equipment can be avoided. The traditional heating method is heated to the specified temperature, and then the heating is stopped. It needs to be turned on or has been heated at full power, which results in a very demanding heating time. A constant frequency conversion electric boiler is used for heating. After heating to a certain temperature, the insulation can be converted into low-power operation.
　　3.能够利用储热能力
　　3. Be able to use heat storage capacity
　　蓄热锅炉是“煤改电”工程的种供热方式。它在夜间通过山谷积累能量，然后在白天有秩序地释放能量。这样可以促进夜间电能的消耗，避免电能的浪费。
　　The regenerative boiler is the first heating mode of the national "coal to electricity" project. It accumulates energy through the valley at night, and then releases energy in an orderly manner during the day. This can promote the consumption of electricity at night and avoid the waste of electricity.