多年来，射线防护门的应用越来越广泛，这与它的特性和性能是分不开的。我们凭借的产品和服务，一直受到广大消费者的好评，下面小编就为大家整理出几点关于防盗门的作用知识:
　　Over the years, the application of radiation protection door is more and more extensive, which is inseparable from its characteristics and performance. With our high-quality products and services, we have been well received by the majority of consumers. The following editor will sort out some knowledge about the function of anti-theft doors for you:
　　1、平开门:平放在打开的门被设置在一边的门框,下固定铰链,铰链的门和门框连接在一起,使门铰链轴旋转打开门打开和关闭的门主要由框架、门板、铰链、门螺栓,压实机理、停止缓冲装置,等等,可以安装电机传动,电动或液压推杆或其他驱动门在墙上的影响的过程中,一般将停止缓冲装置,门内侧粘接密封橡胶垫，与门框合缝，起到密封和缓冲作用，门的结构开启。
　　1. Door opening: the door frame that is placed horizontally on one side of the open door, and the hinge is fixed at the bottom. The hinge door and the door frame are connected together, so that the hinge axis of the door rotates to open and close the door. The door opening and closing mainly consists of the frame, the door plate, the hinge, the door bolt, the compaction mechanism, the stop buffer device, etc., which can be installed in the process of motor drive, electric or hydraulic push rod or other driving effects of the door on the wall, Generally, the buffer device will be stopped, the inner side of the door will be bonded with the sealing rubber gasket, and the door frame will be seamed to play the role of sealing and buffering, and the structure of the door will be opened.
　　2. 推拉防护门:推拉的门运动方向和垂直方向平行与墙体、放置高于或低于身体的旅行机制在门口轻门安装在顶部,可以挂开推拉的门,门驱动机构安装在下面,根据驱动推和拉的底部的门推拉的门主要由门板、驱动装置、限位开关、把手、导轨和停止缓冲装置,如果你需要力量,一般采用电机驱动，射线屏蔽和行走时应考虑吊车行走机构相似的门后透光设计，一般情况下，门板和墙体的孔径根据辐射程度不同，门与墙体搭接宽度不同，效果较好。
　　2. Push and pull protective door: the moving direction and vertical direction of the push-pull door are parallel to the wall, and the travel mechanism placed higher or lower than the body is installed on the top of the light door at the door, the push-pull door can be hung open, and the door driving mechanism is installed on the bottom. According to the driving push and pull of the bottom door, the push-pull door is mainly composed of door plate, driving device, limit switch, handle, guide rail and stop buffer device, If you need strength, it is generally driven by electric motor. When ray shielding and traveling, the light transmission design behind the door similar to the crane traveling mechanism should be considered. Generally, the aperture of the door plate and the wall is different according to the radiation degree, and the overlapping width of the door and the wall is different, so the effect is better.

　　屏蔽效应:外面的不锈钢板,一般的大小是21.50厘米高*宽130厘米* 10厘米厚,内部设置与龙骨,内衬屏蔽板2 - 3毫米(辐射计根据不同的部门有不同的材料,厚度要求),以便工作人员的剂量符合管理目标值
　　Shielding effect: the outer stainless steel plate is generally 21.50cm in height * 130cm in width * 10cm in thickness. The inner part is set with keel, and the inner lining shielding plate is 2-3mm (the radiometer has different materials and thickness requirements according to different departments), so that the dose of the staff can meet the national management target value
　　连锁功能:防护门与辐照装置的电源连接，使射线机处于开启状态时不能打开。当射线装置打开时，防护门打开，2秒内立即关闭。
　　Interlock function: the protective door is connected with the power supply of the irradiation device, so that the ray machine cannot be opened when it is in the open state. When the ray device is opened, the protective door is opened and closed immediately within 2 seconds.
　　控制要求:防护门开关可由电脑控制，按钮控制和手动控制，支持总线接口，在电脑上显示门的状态，在门上显示LED的工作状态。
　　Control requirements: the protective door switch can be controlled by computer, button control and manual control, support bus interface, display the status of the door on the computer, and display the working status of LED on the door.